Frein A Disque Shimano SLX M7100 J-Kit - 1700mm
Frein A Disque Shimano SLX M7100 J-Kit - 1700mm
Frein A Disque Shimano SLX M7100 J-Kit - 1700mm
Frein A Disque Shimano SLX M7100 J-Kit - 1700mm
Frein A Disque Shimano SLX M7100 J-Kit - 1700mm
Frein A Disque Shimano SLX M7100 J-Kit - 1700mm
En stock

Shimano SLX M7100 1700mm Disc Brake

€129.00
VAT included

This purchase earns you €7.74 in rewards, which you can convert into a voucher to use on your next order.
Close
Shipping in 24/72hFrance & Europe
Pay in 2× / 3×secured with Alma
Expert adviceat your service
Satisfied or refunded14-day returns
 
  • SHIMANO SLX M7100 J-KIT DISC BRAKE - 1700mm

    The SHIMANO SLX M7100 brake kit features the SERVO-WAVE system, delivering outstanding and reliable performance with smooth operation. It boasts a short, two-finger lever that is slim and ergonomic for easy braking modulation. The dual-piston master cylinder and caliper ensure powerful and reliable braking in all conditions. The M6100 lever also features additional support on the handlebar for increased rigidity during braking.

    Thanks to its I-SPEC clamp, installation is very quick and doesn't require removing the grips. It also allows for a personalized cockpit adjustment thanks to a 20° adjustment angle for the shifter. The J-KIT system allows you to adjust the hose length before attaching it to the master cylinder and/or facilitates internal routing.


    FEATURES

  • Brake type: Hydraulic disc
  • Lever: BL-M7100 / Right side / I-Spec collar / 2 fingers
  • Caliper: BR-M7100 / Postmount / 2 pistons
  • Hose: SM-BH90 - 1700mm
  • J-Kit: Yes (the hose is not connected)
  • Oil type: Mineral
  • Weight: 309g

  • BRAKE INSTALLATION

    - Position your brake lever on your handlebars. - Mount your caliper onto the disc brake bracket. - Remove the black rubber cap from the end of the brake hose. - Remove the end caps from the brake levers. - Slide the black rubber nut cover onto the brake hose. - Do not remove the small tab on the end of the hose. - Insert the brake hose into the lever nut. - While keeping the hose fully seated in the lever nut, tighten the nut to compress the olive inside the lever. Do not overtighten; the threads of the nut should remain visible, as they will be covered by the nut cover you previously slid onto the hose. - Now you can pump the brake to complete the installation.

51 Items

4 other products in the same category:

Customers who bought this product also bought:

Questions fréquentes

Is a disc brake a plus in BMX Race?

Yes, it offers more powerful and consistent braking, especially in the rain or at the end of a moto. More and more Race frames and forks are now disc-compatible.

Is shipping free?

Yes: shipping is free within mainland France from €99 of purchase. Below that, the cost is shown at checkout according to weight and the chosen shipping method.

Can I pay in instalments?

Absolutely. You can pay for your purchases in 2 or 3 instalments with Alma, completely securely. The option appears automatically at checkout.

How long do I have to return an item?

You have 14 days after delivery to change your mind. The item must be new, unfitted and in its original packaging to be returned or exchanged.

Do you deliver to the French overseas territories (DOM-TOM)?

Yes, we also ship to the French overseas territories (DOM-TOM). Times and costs depend on the destination and parcel weight; the exact amount is calculated and shown before you confirm your order.

Product added to wishlist